Two Router Bits for Different Edge Profiles
If you are deciding between a bullnose router bit and a table edge router bit, the choice comes down to the look you want and the workpiece you are routing. Both bits shape the edge of wood, but they produce distinct profiles and serve different types of projects. This comparison covers the practical differences so you can pick the right bit for your next build.
Bullnose vs Table Edge: Key Differences
The bullnose bit creates a half-round profile with a bead and a radius. It is designed to round over the top and bottom edges of a board in a single pass, leaving a smooth, symmetrical curve. The Infinity Tools 1/2" Shank Bullnose Router Bits come in six size variants, from a 1/4" bead height up to 1-1/8", so you can match the profile to the thickness of your material. These bits are bearing-guided, which means they follow a template or the edge of the workpiece, making them ideal for curved pieces as well as straight edges.
The table edge router bit (Infinity Tools 1/2" Shank Table Edge Router Bit) cuts a single, wider curve that is proportioned for tabletops. Its overall diameter is 2-1/2" with a profile width of 1" from the edge of the bearing. This bit produces a single smooth curve that is not a full half-round; it is a unique profile that gives a modern, elegant look to dining or coffee tables. It is a dedicated profile bit rather than a general-purpose roundover.
- Profile shape: Bullnose: half-round with bead and radius. Table edge: single smooth curve (not a full half-round).
- Typical uses: Bullnose: stair treads, shelves, window sills, curved edges. Table edge: dining tables, coffee tables, fine furniture, period reproductions.
- Variants available: Bullnose: six sizes (bead height from 1/4" to 1-1/8"). Table edge: one standard size.
- Guiding method: Both are bearing-guided, suitable for router table use. The bullnose bit also supports template routing for curved pieces.
When to Choose a Bullnose Router Bit
Choose a bullnose bit when you need a symmetrical half-round profile on the edge of a board. It is the right choice for stair treads, shelves, and window sills where you want a rounded edge that looks the same on the top and bottom. The bearing-guided design also lets you follow a template, so you can bullnose the edge of curved pieces like an arched shelf or a custom table top. The Infinity Tools bullnose bits are available in six bead heights, so you can match the profile to the thickness of your material. For a 3/4" thick shelf, the 3/8" / 3/16" variant would be a natural fit, while a 1" thick stair tread might call for the 1/2" / 1/4" variant.
When to Choose a Table Edge Router Bit
Choose the table edge router bit when you want a single, elegant curve on a tabletop. The profile width is 1" from the edge of the bearing, which creates a substantial curve that looks modern and refined. This bit is designed specifically for dining and coffee tables, but its profile also suits fine furniture and period reproductions. If you are building a table where the edge is a focal point, this bit gives you a distinctive look that a standard roundover or bullnose cannot replicate.
Product Facts at a Glance
- Infinity Tools 1/2" Shank Bullnose Router Bits w/ Bearing: Bearing-guided bullnose router bits mill beautiful stair treads, shelves, or window sills with a single pass. They are available in six size variants from 1/4" to 1-1/8" bead height. The size range lets you match the profile to your material thickness, and the bearing guide enables template routing for curved workpieces.

Infinity Tools 1/2" Shank Bullnose Router Bits w/ Bearing - Infinity Tools 1/2" Shank Table Edge Router Bit: The Table Edge Router Bit (56-601) cuts a smooth, well-proportioned curve ideal for dining or coffee tables. Overall diameter is 2-1/2" with a profile width of 1" from the edge of the bearing. This bit is purpose-built for tabletops, giving a modern, elegant edge that a standard roundover cannot achieve.

Infinity Tools 1/2" Shank Table Edge Router Bit
Making the Final Choice
Your choice depends on the project. For stair treads, shelves, or any edge that needs a symmetrical half-round profile, pick a bullnose bit. For a single, elegant curve on a tabletop, the table edge bit is the better option. Both bits are bearing-guided and work well in a router table, but only the bullnose bit offers multiple size variants and template routing capability. If you need both types of profiles in your shop, owning one of each gives you the flexibility to handle a wider range of edge-forming tasks.


