Back to Blog
Comparisons 2026-11-17 Infinity Cutting Tools | Premium Woodworking Tools ... 0 views

Scrub Plane vs Skewed Rabbet Plane: Which Removal Job First

Scrub Plane vs Skewed Rabbet Plane: Which Removal Job First

A scrub plane and a skewed rabbet plane solve different removal problems. Compare the Infinity Tools models and learn which job comes first.

Two planes, two different removal jobs

The scrub plane and the skewed rabbet plane both remove wood, but they answer different questions. The scrub plane asks, “How do I bring this board close to final dimension and flatness fast?” The skewed rabbet plane asks, “How do I cut a clean slot, half-slot, sill, or rabbet on a door or window frame?”

That distinction matters because the right order is usually scrub first, rabbet later. You flatten and dimension the stock before you cut joinery into it. If you try to cut a rabbet on a twisted board, the rabbet may end up shallow or uneven once the board is flattened. The scrub plane handles the rough flattening; the skewed rabbet plane handles the precise recess.

Infinity Tools scrub plane: built for fast stock removal

  • Infinity Tools Wood Scrub Hand Plane: Designed for fast removal of material to bring a workpiece close to final dimension and flatness. This is the plane you reach for when removing twist or thickness, not when cutting joinery.
    Infinity Tools Wood Scrub Hand Plane
    Infinity Tools Wood Scrub Hand Plane
  • Infinity Tools Wood Scrub Hand Plane: 36mm (1.4") wide steel alloy CrV blade, hardened and tempered to 58HRC, deeply cambered with a radiused edge. The camber and width support aggressive cuts across the board rather than fine joinery.
  • Infinity Tools Wood Scrub Hand Plane: Body made from European beech with a hornbeam sole; dimensions 220 x 65 x 130mm (8.7" x 2.6" x 5.1"). The wooden body and sole are traditional materials suited to a roughing plane, and the size is manageable for extended use.

Infinity Tools 24mm skewed rabbet plane: for clean recesses

  • Infinity Tools Wood Skewed Rabbet Hand Plane, 24mm: 24mm-wide (0.9") blade inserted near the center of the body, bed angle 45°, blade covers the entire width of the plane. The narrow blade and full-width coverage suit cutting slots and rabbets where accuracy matters.
    Infinity Tools Wood Skewed Rabbet Hand Plane, 24mm
    Infinity Tools Wood Skewed Rabbet Hand Plane, 24mm
  • Infinity Tools Wood Skewed Rabbet Hand Plane, 24mm: Blade skewed at a 25° angle for slicing through end grain with ease. The skew improves cut quality in cross-grain and end-grain rabbets, reducing tearout.
  • Infinity Tools Wood Skewed Rabbet Hand Plane, 24mm: Adjustable sole for setting the mouth opening; wedge secures the blade; blade projection, angle, and wedge tightness adjusted with light taps using a mallet. These adjustments let you tune the plane for clean cuts in different woods and rabbet widths.

Key differences at a glance

  • Primary job: Scrub plane: fast removal to dimension and flatness. Skewed rabbet plane: cutting slots, half-slots, sills, and rabbets.
  • Blade width: Scrub: 36mm (1.4"). Rabbet: 24mm (0.9").
  • Blade shape: Scrub: deeply cambered, radiused edge. Rabbet: skewed at 25°.
  • Adjustment: Scrub: Norris-style mechanism with brass knob for depth; wedge with brass tensioning screw. Rabbet: adjustable mouth, wedge tapped with mallet.
  • Typical use: Scrub: flattening and thicknessing rough boards. Rabbet: joinery on door and window frames.

Which removal job comes first?

  1. 1. Flatten and dimension with the scrub plane: Use the scrub plane to remove twist and bring the board close to final thickness and flatness. The cambered blade takes heavy cuts without needing to be perfectly set for finish.
  2. 2. Follow up with finer planes: The scrub plane leaves a rough surface. As the product record notes, follow up with a jack plane, jointer plane, and smoothing plane for a flat surface.
  3. 3. Cut rabbets with the skewed rabbet plane: Once the stock is flat and dimensioned, use the skewed rabbet plane to cut the slot or rabbet. The adjustable mouth and skewed blade help produce clean walls and shoulders.

When to use a scrub plane

Reach for the Infinity Tools scrub plane when you need to remove a lot of material quickly—flattening a rough-sawn board, removing twist, or bringing a workpiece down to thickness. The deeply cambered blade and 36mm width are designed for aggressive cuts, and the wooden body is shaped for comfortable handling during extended use.

The scrub plane is not a finishing tool. Its cuts are scooped and rough, so plan to follow with a jack, jointer, and smoothing plane to achieve a flat, finished surface.

When to use a skewed rabbet plane

The 24mm skewed rabbet plane is the tool for cutting slots, half-slots, sills, and rabbets on doors and window frames. The skewed blade slices through end grain more easily than a straight blade, and the adjustable mouth helps control tearout. The blade covers the full width of the plane, so you can work right up to a layout line.

This is a joinery plane, not a roughing plane. Use it after your stock is flat and dimensioned. The wedge and tapped adjustments require a mallet—Infinity Tools recommends their 101-757 or 101-758 Delrin-tipped brass mallet for this.

Preparation and sharpening for both planes

Both planes may require initial flattening of the blade back and honing before first use. For the scrub plane, the blade is coated with oil and delivered in shrink wrap, so clean it before honing. The skewed rabbet plane’s blade can be removed for sharpening by tapping the back of the body with a mallet while securing the blade with your opposite hand. Always follow the manufacturer’s instructions for adjustment and use.

Related Articles

Customer Service
Home
Products
Cart
Profile