Ripping Blade vs Combination Blade: The Core Difference
The main difference between a ripping blade and a combination blade lies in the tooth geometry and count. A ripping blade typically has fewer teeth (often 24) with a flat-top grind (FTG) and a steep hook angle, designed to cut aggressively along the grain. A combination blade has more teeth (often 40 or 50) with alternating top bevel (ATB) or a mix of grinds, allowing it to cut both with and across the grain reasonably well.
If your primary task is ripping solid lumber to width and you want a glue-ready edge, a dedicated ripping blade is the better choice. If you frequently switch between ripping and crosscutting and don't want to change blades, a combination blade offers more versatility.
Infinity Tools 10" x 24T Ripping Tablesaw Blade at a Glance
- Infinity Tools 10" x 24T Ripping Tablesaw Blades, 5/8" Bore: 24 teeth with a Flat Top Grind and 20° of Rake Angle for fast, efficient ripping that leaves a glue-ready finish. A low tooth count and FTG design are ideal for ripping solid wood, producing smooth, straight cuts that require minimal sanding before glue-up.

Infinity Tools 10" x 24T Ripping Tablesaw Blades, 5/8" Bore - Infinity Tools 10" x 24T Ripping Tablesaw Blades, 5/8" Bore: Chrome Armor coating prevents rust and eliminates pitch and resin build-up, extending blade life. When ripping resinous softwoods or hardwoods, pitch buildup can slow cutting and reduce finish quality. The coating keeps the blade running cleaner longer.
- Infinity Tools 10" x 24T Ripping Tablesaw Blades, 5/8" Bore: Ripping Blade (010-124) is an excellent choice for saws with less than 3 h.p. or when removing a minimal amount of material. Lower-horsepower saws benefit from the lower drag of a ripping blade, allowing them to cut efficiently without bogging down.
When a Ripping Blade Excels
A ripping blade is your best option when you need to rip solid wood stock—especially hardwoods—for joinery or panel glue-ups. The flat-top grind produces a square-bottom kerf that leaves a flat, clean surface. With the Infinity Tools 10" x 24T ripping blade, you get a glue-ready finish straight off the saw, reducing the need for jointing or planing before assembly.
Because it has only 24 teeth, each tooth takes a larger chip, making the cut faster and reducing the load on the saw motor. This is particularly helpful on saws under 3 HP. The large gullets help clear sawdust quickly, keeping the blade cool and the cut clean.
When a Combination Blade Makes Sense
A combination blade typically has 40 to 50 teeth with an alternating top bevel (ATB) grind, sometimes mixed with a few flat-top teeth. This design allows it to rip reasonably well while also producing clean crosscuts and miters. If you work on a variety of projects that involve both ripping and crosscutting, a combination blade saves you the time of swapping blades between operations.
The trade-off is that a combination blade will not produce as smooth a glue-line rip as a dedicated ripping blade. The ATB teeth leave a slight V-shaped groove in the kerf, which may require light sanding or jointing before glue-up. For many woodworkers, this is an acceptable compromise for the convenience of one blade.
Tooth Count and Cut Quality
Tooth count directly affects cut speed and finish. Fewer teeth (24 or fewer) cut faster but leave a rougher surface on crosscuts; more teeth (40 or more) produce smoother crosscuts but cut slower and require more power. For ripping, a low tooth count with FTG is ideal. For combination use, a mid-range tooth count (40-50) with ATB is a practical middle ground.
If you primarily rip solid lumber and want the best possible edge for glue-ups, choose a ripping blade like the Infinity Tools 10" x 24T. If you need a single blade for mixed tasks and are willing to sacrifice some rip-cut smoothness, a combination blade is the way to go.
Making Your Choice
Consider your typical workflow: If you spend most of your time ripping stock for cabinets, furniture, or millwork, a dedicated ripping blade is a smart investment. If you do a mix of ripping and crosscutting and prefer not to change blades, a combination blade offers convenience. Many woodworkers own both and swap based on the task, but if you can only have one, a combination blade is the more versatile option.
Regardless of choice, ensure the blade bore matches your saw arbor (5/8" is standard for most table saws) and that the blade diameter fits your saw's maximum cutting capacity.

