Two Narex lines, two different jobs
Narex Richter chisels and Imperial paring chisels look similar on a shelf, but they are built for different tasks. Richter is a bench chisel line designed for all-around work, including mallet use. Imperial paring chisels are longer, lighter-duty tools for shaving small amounts of edge grain to fine-tune joinery fits. Neither is a direct upgrade over the other; the right choice depends on whether you need a chisel you can strike or one optimized for controlled paring.
This guide compares the two using the supplied catalog records so you can match the tool to your workflow, not just the price tag.
Key differences at a glance
- Primary use: Richter: all-around bench chisel for chopping and paring, strong enough for mallet work. Imperial: paring only, not meant to be struck with a mallet.
- Blade length: Richter blades range from 4-5/8" (1/8") to 6" (1-1/2"). Imperial paring chisels have a 9-5/8" blade and 13-3/8" overall length.
- Steel: Richter: chrome-manganese (Cr-V) steel, tempered to at least 62 HRc. Imperial: chrome-magnesium steel hardened to Rc59.
- Handle material: Richter: European ash handles with stainless steel ferrules and leather washers. Imperial: stained and waxed hornbeam handle with a fine brass ferrule.
- Sizes available: Richter: 1/8" to 1-1/2" (eight sizes). Imperial: 1/4", 1/2", 3/4", 1", 1-1/4", and a set of five.
- Edge protection: Richter chisels include an edge guard. The supplied Imperial record does not mention an edge guard.
When the Richter bench chisel is the better fit
Choose Richter if you want one chisel set that can handle chopping dovetails, cleaning mortises, and general bench work. The knife-edge side bevels let you work into tight corners, while the steel and handle construction are designed to withstand mallet blows. The eight-size range (1/8" to 1-1/2") covers most furniture-scale joinery, and the optional 14-pocket leather tool roll keeps the set organized.
Richter is also the more practical choice if you are building a first serious chisel collection. The edge guards protect the edges between sharpening sessions, and the sizes step in 1/8" increments up to 1", then jump to 1-1/4" and 1-1/2".
Richter details that matter for mallet work
- Narex Richter Chisels: Knife edge side bevels allow use in tight corners and delicate joinery, but are still strong enough for mallet use. This is the key distinction: Richter chisels can be struck, so they serve as chopping and paring tools in one.

Narex Richter Chisels - Narex Richter Chisels: Blades are tempered to achieve a minimal hardness of 62 HRc. Higher hardness generally means better edge retention when chopping, though it can make sharpening slightly slower.
- Narex Richter Chisels: Stainless Steel Ferrules and Leather Washers — These heavy-duty ferrules and leather washers prevent handle splits and absorb shock from mallet blows. These handle components are specifically included to handle the stress of mallet work.
- Narex Richter Chisels: Each of these chisels comes with an edge guard to protect it from damage when it’s not in the tool roll. Edge protection is included, which is helpful if you store chisels loose or in a drawer.
When the Imperial paring chisel is the better fit
Choose the Imperial paring chisel if your work is mostly fine fitting: trimming hinge mortises, paring end grain on tenons, or adjusting joints for a perfect interlock. The longer blade (9-5/8") and overall length (13-3/8") give you more control and reach than a standard bench chisel, and the shallow primary bevel lets you remove small amounts of material with low force.
The trade-off is that this chisel is not designed for mallet use. If you need to chop waste, you will still need a bench chisel. The Imperial is a specialized tool for the final fitting stage.
Imperial paring chisel details for fine fitting
- Narex Imperial Pairing Chisels: The Paring Chisel is a hand tool worker's best choice for shaving away small amounts of edge-grain material in order to achieve the perfect fit between joinery components. This defines its role: precision fitting, not bulk removal.

Narex Imperial Pairing Chisels - Narex Imperial Pairing Chisels: 9-5/8" blade length, 13-3/8" overall length (245mm, 390mm) The extra length provides reach and control for paring tasks where a shorter bench chisel feels cramped.
- Narex Imperial Pairing Chisels: While this style of chisel is not meant to be struck with a mallet, the shallow grind angle of the primary bevel allows any woodworker to pare away material with a controlled stroke and low degree of force. This is a critical limitation: using a mallet could damage the tool. The shallow bevel is designed for hand pressure only.
- Narex Imperial Pairing Chisels: High quality ground chrome-magnesium steel hardened to Rc59 The steel is slightly softer than the Richter line, which may sharpen more easily but may not hold an edge as long in chopping tasks.
Which sizes do you actually need?
For most furniture joinery, a 1/4", 1/2", and 3/4" chisel cover the majority of tasks. If you are buying Richter, the eight-piece set gives you every size from 1/8" to 1-1/2", which is useful if you repair or build a wide range of projects. The Imperial paring chisel is available in 1/4", 1/2", 3/4", 1", and 1-1/4", or as a set of five. A single 1/2" or 3/4" paring chisel is often enough for general fitting; add smaller sizes if you work on delicate joinery.
- Richter sizes: 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2"
- Imperial sizes: 1/4", 1/2", 3/4", 1", 1-1/4", or set of five
What the records do not confirm
The supplied information does not include sharpening angles, bevel geometry beyond the shallow grind of the Imperial, or specific care instructions such as honing frequency. It also does not state whether the Imperial chisels include edge guards. These details may be available from the manufacturer, but they are not confirmed in the catalog records provided here. Use this guide to understand the intended use and trade-offs, and consult the product packaging or Narex documentation for maintenance specifics.


