Back to Blog
How-to Guides 2026-11-12 Infinity Cutting Tools | Premium Woodworking Tools ... 9 views

How to Use a Router Template for Door Making

How to Use a Router Template for Door Making

Learn how Infinity Tools Heavy Duty Door Making Templates work with your router and jig to create precise frame and panel doors. Covers setup, compatibility, and key tips.

What Makes These Templates Different

If you're building frame and panel doors with a router, the Infinity Tools Heavy Duty Door Making Templates are designed to cut the mating shapes for both the panel and the rail. Unlike plastic alternatives, these templates are made from 3/4" thick Baltic birch plywood, which gives a solid bearing surface for your router's rub collar or guide bushing.

Each set includes 20 templates: 10 for the panel and 10 for the rail. They are available in Cathedral or Arched profiles, so you can choose the style that fits your project.

Key Specifications

  • Infinity Tools Heavy Duty Door Making Templates: Made of 18mm (3/4") thick Baltic Birch plywood. The thickness provides maximum support for the bearing or rub collar, reducing chatter and improving cut consistency.
    Infinity Tools Heavy Duty Door Making Templates
    Infinity Tools Heavy Duty Door Making Templates
  • Infinity Tools Heavy Duty Door Making Templates: Twenty templates included with each set - 10 for the panels and 10 for the rails. You get matched sets for both door parts, so the tongue and groove align correctly when assembled.
  • Infinity Tools Heavy Duty Door Making Templates: Designed for 6" to 20" parts, or frames 9-3/4" to 23-3/4" based on a 3/8" deep cope joint and a 2-1/4" wide stile. This tells you the range of door sizes you can produce with a single template set, helping you plan your stock dimensions.
  • Infinity Tools Heavy Duty Door Making Templates: HD templates must be used with our HD Frame Master and HD Panel Master. These templates are not standalone; they require the matching jig system to hold and guide the workpiece.

Setting Up the Templates

Before routing, attach the correct template to your HD Frame Master or HD Panel Master jig. The rail templates and panel templates are the same length, but they have a 5/16" offset built in so the machined tongue of the panel fits into the machined groove of the rail. Note that the template sets themselves do not mesh together; the offset is handled by the jig setup.

Use the exclusive indexing fences on the jig to center and align the workpiece on the template. This ensures the profile is cut evenly on both edges of the part.

Routing the Profiles

With the template mounted and workpiece clamped, set your router to a moderate speed suitable for the bit and material. Use a rub collar or guide bushing that matches the template's offset.

Make multiple light passes rather than one deep cut. Because the template is 3/4" thick Baltic birch, the bearing has plenty of surface to ride on, which helps prevent tipping or wandering.

After routing all panel and rail pieces, test the fit before assembly. The 5/16" offset is designed to create a snug tongue-and-groove joint, but always dry-fit a sample to confirm.

  1. 1. Mount the template: Attach the rail or panel template to the corresponding HD jig using the provided hardware. Ensure it is flush and secure.
  2. 2. Align the workpiece: Use the indexing fence to center the workpiece on the template. Clamp firmly so it doesn't shift during routing.
  3. 3. Set router depth: Adjust the bit so it cuts to the full profile depth in the material, but plan to reach that depth in 2-3 passes.
  4. 4. Route the profile: Run the router along the template in a consistent direction (typically climb-cut on the final pass for a clean edge). Let the bearing ride smoothly on the plywood.
  5. 5. Repeat for all parts: Route all rail pieces with the rail template, then switch to the panel template for the panel pieces.

Template Care and Longevity

Baltic birch plywood is durable, but it is still wood. Keep the templates clean of pitch and dust after use. Store them flat in a dry environment to prevent warping. If the bearing surface becomes worn or nicked over time, you can lightly sand it smooth. The templates come with a lifetime guarantee against defects in material or workmanship.

Because these are not plastic, they will hold up better to repeated use with sharp router bits. However, always inspect the template edge before each use to ensure it hasn't been damaged by a bit collision.

Related Articles

Customer Service
Home
Products
Cart
Profile