Back to Blog
How-to Guides 2026-11-21 Infinity Cutting Tools | Premium Woodworking Tools ... 0 views

How to Set Up a Drill Press Table for Accurate Drilling

How to Set Up a Drill Press Table for Accurate Drilling

Learn how to set up a drill press table for accurate drilling with the Infinity Tools Plycore Drill Press Table. This guide covers mounting, alignment, and tips for precise results.

Why a Dedicated Drill Press Table Improves Accuracy

A stable, flat work surface is the foundation of accurate drilling. The Infinity Tools Plycore Drill Press Table replaces the small, often uneven table that comes with many drill presses, giving you a larger, flatter area for consistent hole placement. Its 16" x 24" (15-1/4" x 23-1/4") surface is made from 1" premium plycore with a Microdot laminate that resists wear and stays flat over time.

Mounting the Table to Your Drill Press

The table is designed to fit drill presses with tables ranging from 12" to 20" wide. Two toggle clamps with #10 x 3/4" screws are included. You choose where to position the clamps on the bottom of the table to best match your drill press's mounting holes.

  1. Position the table: Place the Infinity table on your drill press's existing table. Center it so the drill bit aligns with the center insert.
  2. Attach the toggle clamps: Screw the included toggle clamps into the bottom of the table using the #10 x 3/4" screws. Position them to align with your drill press's mounting slots or holes.
  3. Secure the table: Tighten the clamps firmly. The table should not shift under pressure. Check that the surface remains level with the drill press column.

Using the T-Tracks for Workholding and Fence Installation

The table comes with four extruded aluminum universal T-tracks installed. Each track is 3/4" wide and 3/8" deep. They accept 1/4" x 20 hex bolts or 1/4" and 5/16" T-bolts. These tracks let you attach fences, stops, or clamps for repeatable positioning. A fence helps keep your workpiece square to the bit, which is essential for accurate drilling.

Infinity Tools Plycore Drill Press Table at a Glance

  • Infinity Tools Plycore Drill Press Table Only: The table measures 16" x 24" (15-1/4" x 23-1/4") and is made from 1" premium plycore with a Microdot laminate surface, balance-laminated on the bottom. A large, flat, and stable surface reduces workpiece deflection and improves hole accuracy.
    Infinity Tools Plycore Drill Press Table Only
    Infinity Tools Plycore Drill Press Table Only
  • Infinity Tools Plycore Drill Press Table Only: Includes a 1/2" thick reversible sacrificial center insert that allows drilling through-holes up to 4" in diameter without damaging the table. You can drill larger holes cleanly and replace the insert when it wears out, extending the table's life.
  • Infinity Tools Plycore Drill Press Table Only: Four extruded aluminum universal T-tracks (3/4" wide x 3/8" deep) accept 1/4" x 20 hex bolts or 1/4" & 5/16" T-bolts. T-tracks let you attach fences, stops, and clamps for repeatable and accurate workpiece positioning.

Tips for Accurate Drilling with Your New Table

Once the table is mounted, check that the drill press quill is perpendicular to the table surface. Use a square to verify alignment. For repetitive holes, install a fence and a stop block in the T-tracks. Always clamp your workpiece to the table or fence to prevent movement. The large surface also gives you room to use hold-downs or featherboards for safer operation.

Related Articles

Customer Service
Home
Products
Cart
Profile