Infinity Tools Easy Angle Miter Jig

Easy Angle Miter Jig - Precision Made Easy

Sliding miter saws are great tools in the shop, and are fantastic for cutting standard angles such as 22-1/2°, 45° and 90° from the fence. And often 45° is the steepest angle you can cut.

But when you need to cut non-standard or steeper angles, accurately setting up the saw's head angle - or even returning to a prior specialty setting - can be frustrating at best, almost impossible at worst. It can require specialty or single-use shop made jigs just to cut an angle. And you can still end up with compromised results.

Our Easy Angle Miter Jig solves those problems. Instead of changing the miter saw's cutting head against wood that stays in one position, you change the wood's position while the cutting head remains at 90° to the standard fence. And the two movable arms provide opposite sides of that angle cut with just one setup!

The EAMJ lets you set angles between 11 and 112° quickly and easily. Slide your favorite digital protractor against the movable arms and lock down the star knobs. The included stop blocks let you repeatedly cut lengths up to 22 inches!

Align your blade to the provided center line and secure your EAMJ against your miter saw's traditional fence with either screws or clamps. Adjust your sliding miter saw's depth-of-cut stop to go just below the surface and you're ready to make your first test cuts!

Easily make any sided polygon you want. Divide a 360-degree circle by how many sides you want in your polygon and use your digital protractor to set the arms to that angle. Then make your cuts! No more bumping and pushing on the arm of the saw to approximate the angle. Achieve exact results, first time!

Features:

• Easily mounts to any sliding miter saw
• Left and right cuts exactly match
• Flip stop blocks are provided
• Set to any angle between 11 and 112 degrees
• No more math! Divide a 360-degree circle by how many sides you want in your polygon, set the arms to that angle and make your cuts!
• Can hang on your wall with the provided holes in the base
  

What's in the Box?

A. (1) Jig base
B. (1) Center moveable sled
C. (1) Left side
D. (1) Right side
E. (2) Plycore swing arms
F. (2) Aluminum extrusions for swing arms
G. (2) Pivot dowels
H. (2) Locking star knobs with washers
I. (2) Swing arm stop blocks
J. (2) Fip stop blocks
K. (12) 1-1/4" Black oxide mounting screws for jig body
L. (8) 1" silver mounting screws for accessories
M. (4) Attachment L-brackets for aluminum swing arm extensions
N. (4) Bolts and bosses for attachment brackets
O. (2) Angle brackets for jig attachment to your saw