Back to Blog
How-to Guides 2026-11-17 Infinity Cutting Tools | Premium Woodworking Tools ... 0 views

Shelf Pin Jig vs Cabinet Hardware Jig: Drilling Clean Holes

Shelf Pin Jig vs Cabinet Hardware Jig: Drilling Clean Holes

Learn how to use a shelf pin jig for evenly spaced adjustable shelving and set up a cabinet hardware jig for consistent pull and knob placement. Compare both jigs and choose the right one for your build.

Two jigs, two drilling tasks

A shelf pin jig and a cabinet hardware jig both guide your drill, but they solve different problems. A shelf pin jig spaces holes for adjustable shelving in a vertical line. A cabinet hardware jig locates pull and knob holes on doors and drawers, often across multiple pieces. Choosing the right jig starts with the hole pattern you need to repeat.

This guide covers how to use each jig for clean, consistent results. You will see the key setup differences, spacing options, and practical checkpoints. The goal is to help you drill evenly spaced shelf pin holes and align cabinet hardware without guesswork.

Shelf pin jig: even spacing for adjustable shelves

The Infinity Tools Shelf Pin Jig is built for drilling shelf pin holes evenly. It uses a polyacrylic body with a heavy-duty extruded aluminum spine. The jig is 19" long, 5-1/4" wide, and 1/8" thick, with a 3/4" wide fence spine. Holes are indexed at 1-1/4" on center, and dual rows let you choose the offset distance from the board edge. That offset choice matters for cabinet sides, bookshelves, and custom furniture.

The jig includes both 1/4" and 5mm drill bits, each precision-fit to the indexing holes. That means you can work with imperial or metric shelf pins without a separate jig. For longer runs, drop a shelf pin into one of the extension index holes, align it with a previously drilled hole, and continue drilling without losing alignment.

How to use a shelf pin jig for clean, even holes

Work through these steps in order. The jig's design supports repeatable spacing, but your setup determines whether the holes stay aligned.

  1. Choose your pin size and offset: Select the 1/4" or 5mm bit to match your shelf pins. Decide which row of holes gives the offset you want from the board edge. The dual rows let you pick the distance that suits your cabinet or shelf design.
  2. Set the jig against the workpiece: Place the jig's fence spine against the edge of the board. The 3/4" wide spine registers the jig so the hole rows stay parallel to the edge.
  3. Drill the first holes: Use the precision-fit bit in the indexing holes. The bit-to-hole fit is intended to keep drilling clean and accurate.
  4. Extend the row: For a longer row, place a shelf pin in an extension index hole and align it with a hole you already drilled. Then continue drilling the next section. This keeps the spacing consistent without measuring each hole.

Infinity Tools Shelf Pin Jig: key specs for setup

  • Infinity Tools Shelf Pin Jig: Includes 1/4" and 5mm drill bits You can drill for both imperial and metric shelf pins with one jig, so you do not need to buy separate bits for each pin standard.
    Infinity Tools Shelf Pin Jig
    Infinity Tools Shelf Pin Jig
  • Infinity Tools Shelf Pin Jig: 1-1/4" on-center hole pattern This fixed spacing gives you evenly spaced shelf pin holes without measuring each position.
  • Infinity Tools Shelf Pin Jig: Dual rows of holes for offset distance from the edge You can choose the offset that fits your cabinet side or shelf design, rather than being locked to one distance.
  • Infinity Tools Shelf Pin Jig: 19" long, 5-1/4" wide, 1/8" thick, 3/4" wide fence spine These dimensions tell you how much of the board the jig covers and how it registers against the edge.

Cabinet hardware jig: repeatable pull and knob placement

The True Position Tools Cabinet Hardware & Shelf Pin Install Jig is designed for locating and milling cabinet door and drawer hardware, and it can also be used for shelf pin holes. Its True Calibration system works with laser-engraved rulers to help you set and repeat hardware positions. The jig is machined and calibrated to within 0.005". That level of calibration supports even, symmetrical hardware locations across a set of doors and drawers.

The jig is made from anodized aluminum that is described as 3X stronger, with bushings rated for 10,000+ holes. The rulers are laser engraved in both imperial and metric graduations. No clamp is needed: you hold the jig and drill. That makes it quick to move from one piece to the next, but it also means your grip and positioning matter for accuracy.

Cabinet hardware jig setup for consistent pull holes

Use this sequence to set up the True Position Tools jig for cabinet pull hole spacing. The jig's calibration and rulers do the measuring work, but you still need to establish a repeatable reference.

  1. Set your hardware spacing: Use the laser-engraved rulers to set the jig for the pull or knob spacing you need. The True Calibration system is intended to let you dial in and repeat that setting.
  2. Register the jig on the door or drawer: Position the jig against a consistent edge or reference point on each piece. Because no clamp is needed, hold the jig firmly in place before drilling.
  3. Drill the first piece and check: Drill the hardware holes, then test the placement on the actual door or drawer. Confirm the pull or knob sits where you want before repeating on the rest of the set.
  4. Repeat across the set: Keep the same jig setting and reference edge for every door and drawer. The calibrated adjustment and engraved rulers are designed to help you return to the same setting for symmetrical results.

True Position Tools jig: what supports repeatable hardware placement

Shelf pin jig vs cabinet hardware jig: which one for your task

Use this comparison to decide which jig to reach for. The right choice depends on the hole pattern, not on which jig is more precise.

  • Primary task: Infinity Tools Shelf Pin Jig: drilling evenly spaced shelf pin holes for adjustable shelving. True Position Tools jig: locating and drilling cabinet door and drawer hardware, with shelf pin capability as an additional use.
  • Spacing method: Infinity jig: fixed 1-1/4" on-center indexing with dual rows for edge offset. True Position jig: adjustable calibration with laser-engraved rulers for hardware spacing.
  • Workholding: Infinity jig: the fence spine registers against the board edge. True Position jig: no clamp needed; hold and drill.
  • Best for: Infinity jig: cabinet sides, bookshelves, and custom furniture with adjustable shelves. True Position jig: kitchen and bath cabinets, furniture doors and drawers, and mixed hardware sets.

Getting clean holes: practical checkpoints

Clean holes come from a supported setup, not just a good jig. For shelf pins, make sure the bit matches your pin size and that the jig's fence is fully against the board edge. For hardware, confirm the jig setting before drilling the full set, and test the first piece. With the True Position jig, hold the jig firmly since no clamp is used. With either jig, keep the drill perpendicular to the surface and let the bit do the cutting.

The supplied records do not include drill speed, feed pressure, or bit replacement intervals. Follow your drill and bit manufacturer's guidance for those settings. The jigs provide the spacing and registration; the drilling technique still affects hole quality.

When to use each jig

Choose the Infinity Tools Shelf Pin Jig when your main task is adjustable shelf drilling and you want fixed, repeatable spacing with both 1/4" and 5mm pins. Choose the True Position Tools Cabinet Hardware & Shelf Pin Install Jig when you need to set cabinet pull hole spacing across a set of doors and drawers and want a calibrated, repeatable setup. If you do both tasks regularly, the True Position jig covers hardware and shelf pins, while the Infinity jig offers a dedicated, low-cost solution for shelf pin rows.

Related Articles

Customer Service
Home
Products
Cart
Profile